Shop

CANduino Shop

canduino_03

 

To order please send an e-mail CANduinoShop ( at ) gmail.com .

Actually we haven’t shop partner so we can’t sell kits. Authors of this project are regular aerospace engineers and they can’t spend time for it. For solve this problem we prepared “bill of material” with links to electronic components shops.

If you are interested to be official CANduino seller please send an e-mail at

canduinoeu ( you know what ) gmail.com .

———————————————

If you plan to build CANduino, all elements you can buy in hobby/electronic shops and building markets. Proposed links are for demonstration only. Watch tutorial „Assembling” for betted understanding.

 

List of CANduino bill of materials:

  1. 3D printed CANduino structure.

canduino_structure_1.pngcanduino_walls_1.png

Quantity: 1

Description: How to print, check „3D models” overlap.

Link: none.

 

  1. Screws to a power switch.

Screws_to_a-power_switch.jpg

Quantity: 2

Description: Diameter 3 mm length 6 mm

Link: http://uk.farnell.com/tr-fastenings/3-06prst30tc1d/screw-pozi-thread-forming-m3-x/dp/2474936

 

  1. Screws to a structure

Screws_to_a_structure.jpg

Quantity: 4

Description: Threaded shaft M3 cut to length 115 mm (cut typically from 1 m threaded shaft). Check Tutorial „Assembling”.

Link: http://uk.farnell.com/duratool/d00810/studding-steel-m3/dp/2444324

 

  1. Nuts

nuts_m3.jpg

Quantity: 12

Description: Metal nuts M3

Link: http://uk.farnell.com/duratool/m3-hfst-z100/nut-full-steel-bzp-m3-pk100/dp/1419447

 

  1. Pin plastic spacer

Pin_plastic_spacer.jpg

Quantity: 4

Description: FIX&FASTEN FIX-LCF-3 PCB distance; polyamide; L:3.2mm; latch/latch; Colour: natural

Link: http://www.tme.eu/gb/details/fix-lcf-3/plastic-pegs/fixfasten/

Link2: http://uk.farnell.com/duratool/dtrlcbsm-2-01/pcb-support-3-2mm-pk50/dp/2472772

 

  1. Clamps

Clamps.jpg

Quantity: 10

Description: Clamps length 100 mm height 2,5 mm (about)

Link: http://uk.farnell.com/pro-power/cvr100bk/cable-tie-100mm-pa66-pk100-black/dp/1416050

 

  1. Arduino computer

arduino_due.png

Quantity: 1

Description:

CANduino is compatible with Arduino UNO board, Arduino MEGA board and Arduino DUE board, but because in tutorial and examples we use DUE version only, I strongly recommended this version. It is fastest, has a lot of memory, and use 3.3 V bus necessary to new sensors. You can use “clone” less expensive version.

Link: http://uk.farnell.com/arduino-org/a000062/arduino-due-dev-board/dp/2250861

 

  1. Battery

9v_battery.jpg

Quantity: 1

Description: For test you can use classic 9V battery 6F22 6LR61. For flight you need to use Lithium version of it because Lithium version has up to 4x more capacity and can work in low temperature.

Link: http://pl.farnell.com/duracell/5000394082991/battery-alkaline-industrial-9v/dp/2433048

 

  1. Battery connector

9v_battery_connector.jpg

Quantity: 1

Description: Connector for 9V battery 6F22 6LR61.

Link: http://uk.farnell.com/multicomp/440005p/battery-connector-pp3-type-1-150mm/dp/1183123

 

  1. Power switch

power_switch.jpg

Quantity:

Description: Slide Switch; SPDT; 0,5A/24VDC; ON-ON MFS 121 D (15 mm between mounting holes).  You can use any small low cost swith.

Link: http://uk.farnell.com/te-connectivity/sls12104/switch-slide-spdt/dp/1813681

 

  1. Cable set M-M

Cable_set_M-M.jpg

Quantity: 20 (single cables)

Description: JUMPER RIBBON CABLE, M-M

Link: http://uk.farnell.com/pro-signal/psg-jrbn40-mm/jumper-ribbon-cable-m-m-dev-eval/dp/2452753

 

  1. Cable set M-F

Cable_set_M-F.jpg

Quantity: 20 (single cables)

Description: JUMPER RIBBON CABLE, M-F

Link: http://uk.farnell.com/pro-signal/psg-jrbn40-mf/jumper-ribbon-cable-m-f-dev-eval/dp/2452752

 

  1. Cable set F-F

Cable_set_F-F.jpg

Quantity: 20 (single cables)

Description: JUMPER RIBBON CABLE, F-F

Link: http://uk.farnell.com/pro-signal/psg-jrbn40-ff/jumper-ribbon-cable-f-f-dev-eval/dp/2452751

 

  1. Temperature and humidity sensor DHT22

DHT22_1.jpg

Quantity: 1

Description: DHT22/AM2302 Digital Temperature And Humidity Measurement Sensor

Link: https://www.amazon.com/Vktech-Appliance-Temperature-Humidity-Measurement/dp/B00O8RIYYU

 

  1. GY-80 multi sensor (gyroscope, an accelerometer, a magnetometer, a barometer & temperature)

gy_80.jpg

Quantity: 1

Description: Multi sensor, 9-Axis Attitude Indicator L3G4200D ADXL345 HMC5883L BMP085 Module Arduino

Link: https://www.amazon.com/SUNKEE-1232055-Attitude-Indicator-L3G4200D/dp/B00CD239UG/ref=sr_1_1?s=electronics&ie=UTF8&qid=1480349162&sr=1-1&keywords=GY-80

 

  1. Micro SD connector.

MicroS_-connector.jpg

Quantity: 1

Description: Micro SD Storage Board TF Card Shield Module SPI Interface For Arduino

Link: https://www.amazon.com/Storage-Shield-Module-Interface-Arduino/dp/B00SL0QWDU/ref=sr_1_1?s=electronics&ie=UTF8&qid=1480349538&sr=1-1&keywords=arduino+sd

 

  1. Micro SD card

microSD.jpg

Quantity: 1

Description: Flash Memory Card, MicroSDHC, Class 10, 8 GB. Data volume is not important.

Link: http://uk.farnell.com/transcend/ts8gusdhc10/card-micro-sdhc-8gb-class-10/dp/2290244

 

  1. TRX – CC1000PP

mmcc1000-868mhz_546.jpg

Quantity: 1

Description: Minimodule with transceiver CC1000. This is prototype board for CC1000 Chipcon chip transceiver. Circuit CC1000 (Chipcon) works with 14,7456MHz resonator. This module is compatible with module CC1000PP produced by Chipcon. The module works in the free-access ISM 433MHz frequency band.

Link: http://www.store.propox.com/index.php?p897,mmcc1000-433mhz

 

  1. Antenna TRX

mounting_cable.jpg

Quantity: 1

Description: 17 cm of any simple mounting cable which you solder to CC1000PP transceiver module. Using high quality cable (e.g. in teflon shield) give you warranty that it survive test and flight but it is not necessary.

Link: http://uk.farnell.com/alpha-wire/5856-wh005/wire-ul1213-20awg-white-30-5m/dp/1199128

 

  1. Software Defined Radio Receiver

srd_usb_rtl_dongle.jpg

Quantity: 1

Description: SDR & DVB-T USB Stick (RTL2832 + R820T2). You can buy less expensive USB TV receiver with R820T2 chip, or (I strongly preferred) use updated version of it from rlt-sdr.com service. Updated version is more stable (use special high quality generator – 1ppm TCXO), has metal shield and use SDM connector. Buy it with antenna setup.

Link: http://www.rtl-sdr.com/buy-rtl-sdr-dvb-t-dongles/

 

Optional components:

  1. Voltage logic converter 5V-3.3V (for Arduino UNO/MEGA boards only)

voltage_logic_converter-.jpg

Quantity: 1

Description: LOGIC LEVEL CONVERTER. You need it when you use 5V board (Arduino UNO/MEGA) and 3.3V sensors or transceivers as CC1000. Normally we DO NOT USE it witch Arduino DUE board.

Link: http://uk.farnell.com/adafruit-industries/757/logic-level-converter-4ch-arm/dp/2301651

 

  1. WiFi module ESP8266 (for advanced users)

Esp8266.jpg

Quantity: 1

Description: ESP8266 Serial WIFI Module. This module is WiFi card for Arduino board. Normally we DO NOT USE it in regular project.

Link: https://www.amazon.com/LinkSprite-ESP8266-Serial-WIFI-Module/dp/B017GPEFN4/ref=sr_1_13?s=electronics&ie=UTF8&qid=1480354899&sr=1-13&keywords=ESP8266

———————————————

Regards

Marcin Stolarski

Copyright © CANduino.EU. All rights reserved.